HEY Lighting
Warm architectural cove lighting using a COB LED strip

HEY LIGHTING · HL-ST-001 · SMART COB PRO · TUNABLE WHITE · 24V

Smart tunable-white COB LED strip kit HL-ST-001

A 24V COB strip for coves, built-ins and indirect lighting, with continuous dimming, tunable white and Mi Home control. Kits are offered by total length with a suitable power supply/controller.

740THB / kit

Indicative pricing for 1–25 metre kits. Confirm the power supply/controller and power-injection layout before ordering.

Choose kit length
HEY SKU
HL-ST-001
System voltage
DC 24V
Power
12W/metre
Light format
COB with brightness and colour-temperature adjustment
Control
Bluetooth Mesh 2.0 / Mi Home
Kit length
1–25 metres
Kit format
Strip plus power supply/controller for the selected length
Order via LINEBack to products

Application images are references, not a site-specific lighting plan. Confirm the Mi Home region, required gateway, controller, power-supply sizing and power-injection layout before purchase.

Core system functions

Adjust light for different activities, coordinate multiple zones and save frequently used scenes.

01 · CONTROL

Continuous light adjustment

Adjust brightness and colour temperature continuously, then organise groups, scenes and memory settings.

02 · MESH

Bluetooth Mesh 2.0

Designed for coordinated control of multiple light points. Region and gateway requirements must be confirmed.

03 · INSTALLATION

Two-wire strip format

The strip uses two conductors and an adhesive backing. Mount it on a suitable surface or profile for heat management.

04 · APPLICATION

Cove and indirect lighting

Suitable for ceiling coves, built-ins, shelves and other details that need a continuous line of indirect light.

Installation views

Use the application and strip-detail views to plan placement, mounting surface and access to the power components.

Warm COB strip lighting installed in an architectural ceiling cove
Cove and indirect lightingConcealed placement creates a continuous wash of light across the ceiling and adjacent surfaces.
COB LED strip showing its adhesive backing and continuous light surface
Strip constructionMount the adhesive-backed strip on a clean, suitable surface or profile with enough room for heat management.

Available kit lengths

Choose the total length for the installation, then confirm power-supply sizing and power-injection points for the actual run.

1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m12 m13 m14 m15 m16 m17 m18 m19 m20 m21 m22 m23 m24 m25 m

Confirm the system before ordering

  • Total kit length does not guarantee a single uninterrupted electrical run.
  • Share the actual installation length so the power supply/controller and power-injection points can be checked.
  • Mi Home region, gateway and compatible speaker requirements may vary.
  • Choose a suitable strip and accessories for humid locations.