White HL-NL-001 rechargeable motion-sensor foot light mounted on a wall and lighting the floor

HEY LIGHTING · HL-NL-001 · MOTION SENSOR FOOT LIGHT · RECHARGEABLE · 3000K

Rechargeable Motion-Sensor Foot Light HL-NL-001

Name: Rechargeable Motion-Sensor Foot Light HL-NL-001 / Silver grey · 6 lights / Linked multi-light set
Brand: HEY Lighting
SKU: HL-NL-001-06
Price: 6990 THB

Low-level guidance light for hallways, stairs, bedside routes and dry indoor areas. It activates on movement in darkness, directs warm light down rather than into the eyes, and mounts magnetically without hardwiring.

990THB / light, starting

Published prices are preliminary HEY Lighting selling prices and exclude VAT and delivery. Confirm the selected option and stock before ordering.

Choose colour, quantity and operating type

White · 1 lightHL-NL-001-01 · Standalone sensor · 990 THB Silver grey · 1 lightHL-NL-001-02 · Standalone sensor · 990 THB White · 3 lightsHL-NL-001-03 · Linked multi-light set · 3,990 THB Silver grey · 3 lightsHL-NL-001-04 · Linked multi-light set · 3,990 THB White · 6 lightsHL-NL-001-05 · Linked multi-light set · 6,990 THB Silver grey · 6 lightsHL-NL-001-06 · Linked multi-light set · 6,990 THB

HEY SKU: HL-NL-001
Model: HL-NL-001
Type: Rechargeable foot light with PIR and ambient-light sensor
Light: 3000K warm white · 10 / 35 lumens
Power: 0.4W
Detection: 120° · 4–5 m forward and 2–3 m sideways
Delay: Turns off around 25 seconds after leaving the detection area
Battery: 2200mAh lithium · Type-C charging at 5V/1A
Battery interval: Approximately 2–3 months on Hi / 5–6 months on Lo, depending on trigger frequency
Modes: Hi / Lo / Off
Size and weight: 86 × 76 × 31 mm · 120 g
Mounting: Magnetic body with an adhesive metal wall plate; removable for charging

Order via LINE View detailed images and installation Back to products

Use in dry indoor areas away from direct water. Multi-light linking is available only on Linkage sets. Detection range, linking range and battery life vary with placement, temperature, ambient light and trigger frequency.

Guidance light that works only when needed

Mount it low to make paths and stair edges easier to see while preserving a calm night-time atmosphere.

Motion sensing in darkness

The PIR works with an ambient-light sensor, activating below 10 lux and switching off about 25 seconds after movement leaves the detection area.

Downward, eye-friendly light

Choose 10 or 35 lumens of 3000K warm light. The recessed downward opening increases visible floor area while reducing direct light into the eyes.

Magnetic and removable

Fix the metal plate to the wall, attach the light magnetically and remove it for Type-C charging without dismantling the mounting plate.

Made for hallways, stairs and night-time routes

Choose a smooth, dry surface away from direct water and test the real sensor coverage before permanent placement.

Warm low-level foot light in a dry bathroom zone — **Move at night without the main light**Suitable for bedside routes, corridors to a bathroom and other dry locations that need gentle guidance light.

Multiple linked foot lights installed along wooden stairs — **Linked option for stairways**Multiple lights in a Linkage set can switch on together when one unit detects movement.

Linked foot lights forming a continuous line of corridor illumination — **A continuous corridor route**Published product information states that the linking signal can cross partitions and reach approximately 7 metres; test this in the actual space.

Downward foot lights illuminating an indoor hallway floor — **Wide low-level coverage**Published product information describes an approximately 68° downward beam and a 200 × 150 cm light area when mounted below one metre.

White and silver-grey HL-NL-001 foot-light options — **White or silver grey**Match the finish to the wall, skirting or nearby materials, and confirm the actual colour and stock before ordering.

Magnetic mount, adhesive metal plate and Type-C charging port — **Magnetic mount and Type-C**Attach the plate to a smooth surface and remove the magnetic light for charging without removing the wall plate.

The details to check before choosing placement and quantity

Review the beam, sensing range, linked-light behaviour, controls and mounting method before planning a route through the actual space.

01 · NIGHT GUIDANCE

See the route without switching on the main light

The 3000K warm-white beam points towards the floor rather than eye level. Select 10 lumens for gentle guidance or 35 lumens when step edges and floor changes need to be clearer.

2200mAh batteryPublished product information indicates approximately 2–3 months on Hi or 5–6 months on Lo.
Darkness-aware sensingPIR works with the ambient-light sensor when the surrounding light is below 10 lux.
Automatic switch-offThe light fades out approximately 25 seconds after movement leaves the sensing area.

The interval between charges varies with trigger frequency, brightness mode, temperature and placement.

Feature summary showing motion and light sensing, linked operation, downward light, brightness modes and magnetic mounting — Motion and light sensing · 3000K · 10/35 lm · magnetic mount

Low-level foot light illuminating a night-time indoor route — Low placement guides night-time movement without lighting the whole room

02 · LIGHT & SENSOR

A broad downward beam with forward motion sensing

The housing directs light downward at approximately 68°. Published information describes an illuminated area of about 200 × 150 cm when mounted below one metre. PIR reach is approximately 4–5 metres forward and 2–3 metres to either side.

120° sensing angleSuitable for corridors, bedside routes and stairs with a clear direction of travel.
Reduced direct glareThe angled beam prioritises the floor and step edges instead of eye-level wall brightness.

Diagram showing a 68-degree downward beam and an approximate 200 by 150 centimetre illuminated area — Approximately 68° downward beam when mounted below one metre

Diagram showing 120-degree sensing, four to five metres forward and two to three metres sideways — 120° PIR · 4–5 m forward · 2–3 m sideways

03 · LINKED LIGHTS

One light detects movement, the linked set comes on together

Linkage sets are intended for long corridors, stairways and routes across several rooms. When one unit detects movement, the set lights together to form a continuous route before the user reaches the next sensor.

Approximately 7 m link rangePublished information states that the signal can pass partitions, but the actual space should be tested.
Three- or six-light setsLinked operation is available only on options explicitly labelled as Linkage models.

Multiple linked foot lights installed along a corridor — A continuous route through corridors and corners

Multiple linked foot lights installed along a stairway — Step edges become visible before each light is reached

Example floor plan for linked foot lights along routes inside a home — Example route from the entrance towards multiple rooms

04 · VISUAL COMFORT

More stable brightness with a gentler fade

The constant-current circuit is designed to keep output steadier as battery level decreases. Gradual fade-in and fade-out also reduces the abrupt flash of light in a dark room.

Approximately two-second soft startThe light rises gradually to the selected output instead of switching on at full brightness instantly.
Hi / Lo / OffSelect 35 or 10 lumens, or switch the unit off from the rear control.

Illustration of constant-current control maintaining light output as battery level falls — Constant-current control is designed to slow the drop in visible brightness

Graph comparing constant-current brightness with a conventional battery light — Illustrated output behaviour through the battery cycle

Foot light gradually illuminating a dry bathroom area — Gradual fade-in and fade-out feels less abrupt after waking

05 · CONTROL & INSTALL

No hardwiring, and the light removes for charging

Apply the metal plate to a smooth surface with the adhesive pad, then attach the light magnetically. When charging is needed, remove only the light while the mounting plate remains on the wall.

1Clean the surface and allow it to dry
2Apply the metal plate and press the adhesive firmly
3Attach the light magnetically and select Hi or Lo
4Remove the light and recharge through Type-C 5V/1A when required

Power: 0.4W
Size: 86 × 76 × 31 mm
Weight: 120 g
Operating temperature: -10 to 40°C

For dry indoor use only. Test the position before removing the adhesive backing for permanent installation.

Rear controls with Type-C port, Hi Lo Off switch, Linkage button and magnet — Type-C · Hi / Lo / Off · Linkage button on linked models

Magnetic mount and adhesive metal wall plate — Magnetic removal keeps charging simple

Four-step installation using the adhesive metal plate and magnetic mount — Mount the plate first, then return the light magnetically

Foot-light dimensions of 86 millimetres wide, 76 high and 31 deep — Compact 86 × 76 × 31 mm housing for low-level placement